SKF 315SW1 Single Row Ball Bearings

e - ISO Factor8:0.67; Ab - Cage-Cone Frontface Clearance:3.3 mm; d:28.575 mm; Cg - Geometry Factor:0.0774; D:80.167 mm; C - Cup Width:23.813 mm; Cage Type:Stamped Steel; Series:43000; Cup Part Number:43315; B - Cone Width:24.074 mm;

Rolling Element Material:Bearing Steel; d:50; Accessory:With steel plate cov; Surface Treatment:No; Bearing Unit, Type:Take-Up Type; Fit:J7; Diameter series symbol:For Heavy Load; Fit:J7; Days to Ship:Quote; Machining:No;

Bolt Hole Width:2.25 in; Assembly Weight:2850.000 lb; Stabilizing Ring 1 Reqd3:A8980; E Min.:41.7500 in; A:15.5000 in; H:30.5000 in; Diameter S-1:17 in; F:12.25 in; B:48.7500 in; Bolt Hole Length:3.125 in;

Support Type:Two-Bolt Plummer Blo; Bearing Number:MSE312BX; Dimension J:15.4 in; Bearing - Housing - Seal:MSE312BXHRSS; Housing Width:5.7 in; Bearing Type:Split Cylindrical Ex; Cr - Dynamic Load Rating:87226 lbf; Dimension H:5.630 in; Dimension L:18.3 in; Series Type:Medium Series;

J:64 mm; T max.:200 °C; L:86 mm; G:M6x1; S:6 mm; T min.:-20 °C; B:22 mm; d:17.46 mm; e:15 mm; A2:31 mm;

C0:7.88 kN; Designation of housing:PAE205-; T min.:-20 °C; B:34 mm; L1:21 mm; E:12.5 mm; d:22.22 mm; s1:17 mm; Weight:0.61 kg; H1:10 mm;

Designation of housing:FE207N-; C0:15.2 kN; J:92 mm; L:118 mm; S:8.5 mm; A2:44.5 mm; e:21 mm; d:34.92 mm; G:R1/8"; T max.:100 °C;

B:65.1 mm; N1:25 mm; s1:32.55 mm; J:184 mm; C0:32.8 kN; H1:25 mm; H:69.8 mm; Weight:5.03 kg; Designation of housing:P212-; L1:70 mm;

Shaft Bore Config.:Cylindrical Bore; Inner/Outer Ring Material:Steel; Raceway Ring Shape:Cylindrical Roller; Load Direction:Radial; Internal Clearance Symbol:C3 (Greater than nor; Cylinder shape (suffix symbol: X):No; Revolution Frequency(rpm):6500; Large-capacity type:Standard; Symbol of Bearing Ri

Surface Treatment:No; d:35; Temperature Properties:Standard; Lubrication method:Oil-Free Type; Basic Load Rating, Dynamic Rating(N):25700; Unit Body Material:Cast Iron; Unit Body Material:Cast Iron; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating

Flange O.D. H(φ):94; Width T(mm):55 ～ 80; Shape:Flanged Pilot Type; Seals:VV (Non-Contact Rubb; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Retained:Yes (with retaining;

Bearing Retained:Yes (with retaining; Width T(mm):60; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] 201; Number of Bearings:Double; Bearing Part Number:6203; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with re

B - Cone Width:1.1420 in; Cone Part Number:480; Cage Type:Stamped Steel; T - Bearing Width across Cones:2.5625 in; Ab - Cage-Cone Frontface Clearance:0.12 in; Y2 - ISO Factor10:2.61; r - Cup Frontface To Clear Radius2:0.03 in; d:2.6875 in; Design Units:Imperial; Y1 - ISO Factor9:1.75;

C0:23.2 kN; Weight:2.56 kg; A:54 mm; S:10.9 mm; B:43.5 mm; Z:24.5 mm; T min.:-40 °C; A1:34 mm; J:158 mm; L1:61 mm;

Application:For Outer Ring; Application:For Outer Ring; Material:304 Stainless Steel; Days to Ship:7 Days or more; RoHS:6; L(mm):3 ～ 100; L Dimension Tolerance:Negative Tolerance; O.D. D(φ):42; I.D. d(φ):39;